Our Products

Our address: Unit 2, 1-15 Bennett Street,
Chester Hill NSW NSW 2162
Tel: 02 9724 5566
Fax: 02 9724 3977
sales@alcentregroup.com.au

Infill System

| << Prev | 1 | 2 | Next >> |

Code In Stock Description LengthLn/PkAlloyFinishImage
#41-5010 In Stock Blade 50X10(mm) 6.066060MILL
#41-6516 In Stock Blade 65X16(mm) 6.046060MILL
#41-5050-S In Stock Post 50X50(MM) Single 6.546060MILL
#41-5030-S In Stock Post One Way 50 x30(mm) 6.5m46060Mill
#41-5050-D In Stock Post 50X50(mm) Double 6.546060MILL
#41-5030-D In Stock Post Two Way 50 x 30(mm) 6.5m46060Mill
#41-5050-C In Stock Post 50X50(mm) Corner 6.046060MILL
#41-5010INFILL-5 In Stock Infill Punched with 5mm Gaps for 50 x 10 6.0106060MILL
#41-5010INFILL-10 In Stock Infill punched with 10mm gaps for 50 x 10 6m106060Mill
#41-5010INFILL-20 In Stock Infill punched with 20mm gaps for 50 x 10 6106060Mill
#41-505030 In Stock Top Channell 50 x 30mm for Sliding Gate 6.046060Mill
#41-5050CH In Stock Chanell 50 x 50mm 6.5m46060Mill
#41-6516INFILL-5 In Stock Infill punched with 5mm gaps for 65 x16 6106060Mill
#41-6516INFILL-10 In Stock Infill punched with 10mm gaps for 65 x 16 6m106060Mill
#41-6516INFILL-20 In Stock Infill punched with 20mm gaps for 65 x 16 6106060Mill

# = In Stock otherwise Pre-Order